Panasonic AG-7700E Operating Instructions Manual page 23

S-
with the input signal.
VIDEO 4
S-VIDEO:
When
recording video signals which have been
LINE # J
input to the S1-VIDEO IN connectors.
LINE:
When recording video signals which have been
INPUT
input to the VIDEO IN connectors.
This is used to set the unit's control mode.
CONTROL
* The operation modes of this unit in the REMOTE mode can
be set using dial menu item No. 5001.
3.
Setting the ON SCREEN button
This is used to add a time code or other superimpose signal to
ON SCREEN
the video signal which
is output from the VIDEO
MONITOR
CO)
connector.
— E-23 —