Table of Contents
Advertisement
PIN CONNECTOR
4
2
Green
3
Blue
4
GND
5
GND
6
GND-Red
7
GND-Green
8
GND-Blue
Arrangement of 15-pin D-sub connector
9
+5V Load (optional)
10
GND-H.Sync
11
GND
12
Bi-directional Data (SDA)
13
Horizontal Syne
14
Vertical Syne (VCLK)
15
Data clock (SCL)
CAUTIONS FOR ADJUSTMENT AND REPAIR
BRS
es
Tk cee ES EPS Sia Si ah
SE
Lt Ne SRD EAA
ce AD
Et eS he gE
GE Cay
* Degaussing is always required when adjusting purity or convergence.
* The white balance adjustment has been done by a color analyzer in factroy. The adjustment procedure, described
in the service manual is made by a visual! check.
* Allow 20 minutes warm-up time for the display before checking or adjusting only electrical specification or function.
¢ Reform the leadwire after any repair work.
Caution For Servicing
* In case of servicing or replacing CRT, high voltage sometimes remains in the anode of the CRT. Completely
discharge high voltage before servicing or replacing CRT to prevent a shock to the serviceman.
Advertisement
Table of Contents
