Storing The Trimmer After Use; Repair Service - Husqvarna 600 H Operating Instructions Manual

Quick biade stop
In order to avoid injuries through cuts, the blade
will stop in approx. 0.015 sec. when one of the
two switches is released.
Blade safety rail (Fig. 4)
The cutting blade set back from the blade housing
reduces the risk of injuries due to unintentional
body contact. As soon as the hedge trimmer is
switched off, the sharp cutting blades will stop -
due to safety reasons - exactly under the cover
rail in order to reduce the risk of injuries during
transport.
Impact protector (Fig. 4)
The extended guide rail prevents unpleasant
shocks (blade recoil) being transmitted to the
operator due to impact with solid objects (wall,
ground etc.).
Gear protection feature
If solid objects are caught in the cutting blade and
jam the motor, switch off the machine at once, dis¬
connect the power plug from the power socket,
remove the object and continue with the work.
The equipment is also fitted with an overload cut¬
out, which protects the gears against mechanical
damage in the event of blade jams.
10. Storing the Trimmer after Use_
Store the hedge trimmer in such a way that
the cutting blade cannot cause injury!
To achieve this, place the blade cover supplied
over the cutting blade.
To protect the cutting blade against corrosion the
blade cover may be hung on a wall and filled with
a mixture of 1 part of oil (e.g. engine oil SAE 20)
and 2 parts petrol. Insert the hedge trimmer
together with its blades in the blade cover.
11. Guarantee___
Independently of the guarantee obligations of the
supplier to the consumer resulting from the
purchase agreement, we will offer the following
guarantee:
The guarantee period is twelve months and starts
from the time of the equipment transaction, recorded
by the purchase documents. We will rectify', free
of charge, all operating faults arising within the
guarantee period which are demonstrably the
result of material or production errors, provided
the equipment has been operated in accordance
with the operating instructions. In so far as there
shall be no compulsory liability by law, claims of
any kind over and above the right of rectification
shall not be legitimised for the consumer by this
guarantee. Postage and transport costs will not
be reimbursed.
Overloading and incorrect use shall exempt the
manufacturer from any guarantee claims.
12. Repair Service_
Repairs to electric power tools should only be car¬
ried out by specialist electrical personnnel.
EC Declaration of Conformity
according to EU Guideline of Machines 89/392/EEC
cc
We,
IKRA HOBBY MOTOR Handelsges. mbH, Schlesier StraRe
36, D-64839
Munster / Altheim,
declare under our sole responsibility that the products 600
H,
to which this declaration relates cor¬
respond to the relevant basic safety and health requirements of Directives 89/336/EEC (EMV-
Guide-line), EG 73/23/EEC(Low Voltage Guideline), 89/392/ EEC (Guideline of Machines), 93/44
EEC, 93/68 EEC. For the relevant implementation of the safety and health requirements mentioned in,
the Directives, the folbwing standards and/or technical specification(s) have been respected: EN
60335, EN 55014, EN 61000-3-2:95, EN 61000-3-3:95, EN 60555,
HD
400.1,
HD
400.3.
Munster, 1.10.96 Gerhard Knorr, Technical Director l/^x^oyr
GB-4
1/97