Specifications - Makita WA400MP Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Cutting width
Dimensions
(L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
Approved power unit
This attachment is approved to use only with the follow-
ing power unit(s):
• DUX60 Cordless multi function power head
• DUX18 Cordless multi function power head
• UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read and follow the instruction manual.
Wear protective helmet, eye and ear
protection.
Wear protective gloves.
Wear sturdy boots with non-slip soles.
Warning; Disconnect battery before
maintenance.
Keep your feet away from the weeding
blade.
Keep bystanders and animals at least 5 m
away from the power tool.
Hot surfaces - Burns to fingers or hands.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
980 mm x 226 mm x 196 mm
Sound power level according to Australia
NSW Noise Control Regulation.
Intended use
This attachment is designed for only the purpose of
weeding grass on the ground in conjunction with an
approved power unit. Never use the attachment for
the other purpose. Abusing the attachment may cause
serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Weeding Attachment. Designation of
Type(s): WA400MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN 62841-1:2015+A11:2022, EN ISO 11806-1:2022,
EN IEC 62841-4-7:2022+A11:2022.
Place and date of declaration: Kortenberg, Belgium.
27. 9.2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
7 ENGLISH
WA400MP
220 mm
2.8 kg