Specifications - Makita UV001G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Working width
No load speed
Part number of Vertical cutter
replacement
Thatching blades
scarifier blades
Dimensions during operation
(L x W x H)
when stored
(without grass basket)
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING:
Do not use a corded power supply such as battery adapter or portable power pack with
this machine. The cable of such power supply may hinder the operation and result in personal injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the machine and
bystanders must be at least 15 m.
Warning; Disconnect battery before
maintenance.
UV001G
380 mm
3,200 min
1913J5-0
1913J7-6
L: 1,020 mm to 1,240 mm
W: 680 mm
H: 915 mm to 1,155 mm
550 mm x 680 mm x 640 mm
D.C. 36 V - 40 V max
18.7 - 23.8 kg
IPX4
BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Never put your hands and feet near
the scarifier blades under the machine.
Scarifier blades continue to rotate after the
machine is switched off.
8 ENGLISH
-1