Advertisement
2 SETUP
12
–
Slide license plate holder onto tail section and position.
Info
Ensure that the cables are routed correctly.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
W00397-10
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Join the plug-in connectors of tail light
cable harness
Info
Pay attention to routing of the wiring harnesses.
W00402-10
–
Install the 12-V battery. (
–
Mount the seat. (
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
D08180-10
bm
.
M6
10 Nm (7.4 lbf ft)
bl
.
EJOT PT
®
2 Nm (1.5 lbf ft)
K60x25‑Z
bk
.
M6
10 Nm (7.4 lbf ft)
bs
bt
with the wiring harness.
p. 24)
p. 17)
and turn signal
Advertisement
