Advertisement
–
Fix the handlebar cushion to the handlebar clamp.
–
Install front fender. (
–
Remove the 12-V battery. (
–
Charge the 12-V battery. (
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
(150 XC‑W US)
W00392-10
–
Install the headlight mask with the headlight. (
–
Install the 12-V battery. (
–
Mount the seat. (
(150 EXC EU)
–
Connect plug
W00393-10
–
Insert the black and violet cables of the bulb included in
the separate enclosure into the socket and position it in
the turn signal indicator lamp.
S03673-01
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
–
Join plug-in connector
the black and brown cable colors of the turn signal cable
harness.
–
Join plug-in connector
W00395-10
–
Connect plug-in connector
–
Install the headlight mask with the headlight. (
p. 26)
p. 22)
p. 23)
p. 24)
p. 17)
4
with turn signal wiring harness.
5
of the left turn signal using the
6
of the right turn signal using
7
of the headlight.
8
of the turn signal switch.
SETUP 2
p. 27)
p. 27)
9
Advertisement
