Display Section - Technics RS-TR979 Operating Instructions Manual

(continued)
PGUUIOLOCOUTODTOUONOOSOTORGH
"8-6 -4 ~2E0 0 +2
VUPCOEUDURTUTUOVO ORO ONEOt
COPEUPOOTTOOVOEOCURUDOOD
)@®
Display section
@ Tape counter/ATC display
Normally functions as the tape/linear counter display. During
@ ATC memory Indicator ( Hl)
Flashes during ATC (auto tape calibration), and then remains
illuminated when the ATC operation is completed.
(For RS-TR777: deck 2 only]
@ ATC graphic display
Shows a graphic display of the ATC (auto tape calibration)
operation.
@ Tape-to-tape recording-speed indicators
(1, [x2])
One of these indicators illuminates to show which of the
tape-to-tape recording speeds was selected by pressing the
tape-to-tape recording-speed button.
Muminates to indicate that this unit is in the recording stand-
by mode or is recording.
[For RS-TR777: deck 2 only]
@ Remote-control indicator (R.C.)
Mluminates to indicate that this unit can now be controlled by
the remote control transmitter.
®@
Reverse-side Indicator (<))
Playback Indicator (PLAY)
When flashing, indicates that this unit is in the pause mode
or in the recording stand-by mode.
Input level meter
During playback, this meter indicates the level of the record-
ed sound.
During recording, it indicates the level being recorded, ad-
justed by the recording-level control.