Lnstallation In Horizontal Sliding Windows - Hisense AP0621CR1W Use And Installation Instructions

I C )
Align the tabs on the
with the slots i n the vent panel.
adapter
lnsert the
window exhaust adapter
opening i n the vent panel.
NOTE: The window i n stallation kit can be used with horizontal sliding windows between 18" and 50" wide.
Foam seal L
(Adhesive
type-shorter)
Foam not included
Cut the foam seal L(adhesive type)
(adhesive type-shorter)to the proper
length, and attach it to the window sash
and trame.
(Non-adhesive type)
Foam not included
Cut the foam seal A(Non-adhesive type)
to the window width. Stuff the foam seal
A between the glass and the window to
prevent air and foreign objects from
getting i n to the room.
window exhaust
into the

lnstallation In Horizontal Sliding Windows

M
&
A
Screw
lnsert the screw i n the hole i n
the
window exhaust adapter
prevent the
window exhaust adapter
from sliding out of the vent opening.
lnsert the vent panel assembly, i n cluding
extension panels, if needed, i n to the window
opening. Extend the extension panels, i f
used.
lnstall the Window-lock bracket with a type F
screw as shown i f you need.
10
to