Before using for the first time
Allow the wine conditioning unit to
stand for approx. 1 hour before
connecting it to the power supply.
This will prevent potential functional
problems with the wine conditioning
unit.
Removing packaging material
Remove all packaging material from
the inside of the appliance.
Always remove all packaging
material, including adhesive tape,
before switching on the wine
conditioning unit. The adhesive tape
is difficult to remove from cold
surfaces.
Cleaning the wine conditioning unit
Please refer to the relevant
instructions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Using for the first time
Choosing the right Door assistant
(Push2open/Pull2open)
The Door assistant helps you to open
the appliance door.
You can choose between the two Door
assistants
Push2open
"Selecting further settings - Switching
on the
Door assistant
The factory default Door assistant is
.
Push2open
Select the
Pull2open
your wine conditioning unit has a
furniture front with a handle.
Select the
Push2open
your wine conditioning unit has a
handle-free furniture front.
Using the SommelierSet
"The SommelierSet" section
describes how to use the
SommelierSet.
Miele@home
Your wine conditioning unit is
equipped with an integrated Wi-Fi
module.
Networking is deactivated at the
factory.
To use this feature, you will need:
- a Wi-Fi network
- the Miele App
- a Miele user account. You can create
a user account via the Miele App.
The Miele App will guide you as you
connect your wine conditioning unit to
your home Wi-Fi network.
and
Pull2open
(see
").
Door assistant if
Door assistant if
59