Table of Contents
Advertisement
Quick Links
Single Speed Pool Pump
Installation
& Operation
Manual
Should the installer or owner be unfamiliar with the correct installation or operation
of this type of equipment you should contact the distributor/manufacturer for the
correct advice before proceeding with the installation or operation of this product.
The pump operator or owner must be provided with this owner's manual.
Manufactured by
Advertisement
Table of Contents
Related Manuals for Pentair maytronics ecoclear EC-750-SS
Summary of Contents for Pentair maytronics ecoclear EC-750-SS
- Page 1 Single Speed Pool Pump Installation & Operation Manual Should the installer or owner be unfamiliar with the correct installation or operation of this type of equipment you should contact the distributor/manufacturer for the correct advice before proceeding with the installation or operation of this product. The pump operator or owner must be provided with this owner’s manual.
- Page 2 Its legendary hydraulic design has been refined over 40 years for superior performance. No wonder more than 2 million Pentair pumps have been selected by pool professionals.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page Model Data Installation Pressure Testing Pump Mount Teflon Taping Instructions Fittings Pool Outlets Entrapment Protection Testing and Certification Outlets per Pump Water Velocity Electrical Operation Priming Pump Service and Maintenance Troubleshooting Parts Breakdown Single Speed Pool Pump Owner’s Manual... -
Page 4: Model Data
MODEL DATA OUTPUT POWER MODEL NAME MAX TOTAL HEAD (M) (HP) EC-750-SS POOL PUMP EC-1100-SS POOL PUMP 1100 EC-1500-SS POOL PUMP 1500 TECHNICAL INFORMATION 2” BSP (female) thread on casing to suit 2” fittings with Inlet (Suction):(Suction): included barrel union adaptors to suit 50mm I.D. PVC pipe to AS/NZS 1477 2”... -
Page 5: Installation
INSTALLATION ECOCLEAR® SINGLE SPEED POOL PUMP IS ELECTRICALLY CONNECTED. ENSURE THAT IT IS ISOLATED FROM ELECTRICAL SUPPLY DURING INSTALLATION AND ANY SUBSEQUENT SERVICE WORK. A MEANS FOR DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING, HAVING A CONTACT SEPARATION IN ALL POLES, IN ACCORDANCE WITH THE WIRING RULES. -
Page 6: Pressure Testing
PRESSURE TESTING (Have a trained pool professional perform all pressure tests). Before pressure testing, make the following safety checks: 1. Check all clamps, bolts, lids, and system accessories prior to testing. 2. Release all air in system before testing. 3. Tighten trap lid to 4.1kg-m torque for testing. 4. -
Page 7: Pump Mount
PUMP MOUNT The Industry Standard By Every Measure Pump mount must: 1. Be located away from corrosive or flammable chemicals. Have enough ventilation to maintain air tempertaure at less than the maximum ambient temperture rating. If this pump is installed in an enclosure/pump house, the enclosure must have adequate ventilation (200sq.cm min, inlet &... -
Page 8: Fittings
TEF ON TAPING INSTRUCTIONS • Use only new or clean PVC pipe fittings. • Wrap male pipe threads with a suffi cient number of layers of Teflon tape. • Cover entire thread portion. • Do not overtighten or tighten past thread stop in pump port. •... -
Page 9: Entrapment Protection
Pump suctions are hazardous and can trap and drown or disembowel bathers. Do not use or operate pump, pool or spa if a suction outlet cover is missing, broken, or loose. Follow the guidelines below for a pump installation which minimises risk to users or pools and spas. Entrapment Protection The pump suction system must provide protection against hazard of suction entrapment or hair entrapment/entanglement. - Page 10 800 mm Certified Anti-entrapment Certified Anti-entrapment Cover or Suction Fitting, Cover or Suction Fitting, screw fastened to screw fastened to Main Drain Sump Main Drain Sump No valves between Tee and Main Drains Suction Outlet Suction Outlet (Main Drain) (Main Drain) Pump Valves OK between pump and Tee...
-
Page 11: Operation
OPERATION THE PUMP OPERATOR OR OWNER MUST BE PROVIDED WITH THIS OWNER’S MANUAL. THIS MUST BE READ BEFORE OPERATION, AND FOLLOWED DURING OPERATION. THE PUMP IS NOT INTENDED FOR USE BY YOUNG CHILDREN OR INFORM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE PUMP. -
Page 12: Priming Pump
An automatic internal thermal overload switch protects the motor from heat damage during operation and if operated can restart without notice. Hazardous suctio n . can trap hair or body parts, causing se v ere Maximum ambient temperature for motor operation must injury or death. -
Page 13: Service And Maintenance
SERVICE & MAINTENANCE TO AVOID DANGEROUS OR FATAL ELECTRICAL SHOCK HAZARD, TURN OFF POWER TO MOTOR AND REMOVE PLUG FROM POWER OUTLET BEFORE WORKING ON PUMP OR MOTOR. Routine Maintenance requires regular checking of the pump to ensure no water is leaking from joints whilst pump is operating and inspection/cleaning of trap basket. -
Page 14: Troubleshooting
TROUBLESHOOTING No lubrication or regular maintenance is needed beyond reasonable care and periodic cleaning of strainer basket. When pump is not in use and there is a risk of frost, empty it completely through the drain plug. If shaft seal is worn or damaged consult your Maytronics authorised service agent. - Page 15 SERVICE & MAINTENANCE SYMPTOM CAUSE REMEDY No water coming Prime the pump. Check that there are no air leaks in from pump (Pump is the suction piping or fittings. Air ingress to system working). Ensure the strainer lid is airtight and fitted securely. Check for required ventilation and cooling.
-
Page 16: Parts Breakdown
PARTS BREAKDOWN Single Speed Pool Pump Owner’s Manual... - Page 17 ITEM DESCRIPTION ITEM DESCRIPTION Motor, TEFC O-ring, cover Foot Basket Cover Foot insert Clamp, Cam and Ramp Seal Plate O-ring, drain plug Mechanical seal (PA-7) Drain plug Bolt, 3/8” x 7/8” Stainless Steel Washer, 3/8” x 13/16” Stainless Steel O-ring, seal plate Bolt, 3/8”...
- Page 18 NOTES Single Speed Pool Pump Owner’s Manual...
- Page 19 NOTES Single Speed Pool Pump Owner’s Manual...
- Page 20 IMPORTANT Please attach your sales invoice/docket here as proof of purchase should warranty service be required. Please do not return warranty form to Maytronics Australia – Retain for your records. PURCHASED FROM: PURCHASE DATE: SERIAL NO: MODEL NO: Unit 2/91 Rudd Street, Oxley, QLD 4075 | Australia | 1300 693 657 | www.maytronics.com.au Information contained here in remains the property of Maytronics Australia under Australian copyright law.