Register Fido2 Usb Device In Thinkshield Passwordless Power-On Device Manager; Log In To The System With Passwordless Power-On Authentication - Lenovo ThinkPad E14 Gen 6 User Manual
Hide thumbs
Also See for ThinkPad E14 Gen 6:
- User manual (62 pages) ,
- Regulatory notice (44 pages) ,
- Setup manual (37 pages)
Table of Contents
Advertisement
Register FIDO2 USB device in ThinkShield Passwordless Power-On
Device Manager
Follow the instructions to register FIDO2 USB device in ThinkShield Passwordless Power-On Device
Manager.
Step 1.
Turn on the computer.
Step 2.
Press F12 during the power-on process.
Step 3.
If you set a power-on password, you are prompted to enter the correct password.
Select App Menu ➙ ThinkShield Passwordless Power-On Device Manager and press Enter
Step 4.
Step 5.
Insert the FIDO2 USB device to register the device by following steps:
a.
Select the available FIDO2 USB device that you want to register in the Discovered Devices
field.
b.
Click Yes in the displayed window to confirm the device you selected
c.
If you set a power-on password, you are prompted to enter the correct password.
d.
The User operation request window is displayed. You are prompted to press the button on
the connected FIDO2 USB device, and then follow the on-screen instructions to close the
window.
e.
Press Esc to exit and restart your computer.
Notes:
• If you want to unregister your devices, click the available FIDO2 USB device that you want to unregister in
the My Device field and enter the correct power-on password for verification.
• If you use more than one FIDO2 USB device with a common identifier for registration, only one device is
available.
Log in to the System with Passwordless Power-On Authentication
Follow the instructions to log in to the System with Passwordless Power-On Authentication.
Step 1.
Restart the computer.
Step 2.
ThinkShield Passwordless Power-On Authentication window is displayed.
Step 3.
Insert your registered FIDO2 USB device for detection.
Step 4.
Then follow the on-screen instructions to press the button on your FIDO2 USB device for
verification.
Step 5.
After your device is verified, the power-on process continues.
Note: You should insert the FIDO2 USB device or enter the power-on password within 60
seconds. Otherwise, your computer will shut down automatically.
36
ThinkPad E14 Gen 6 and ThinkPad E16 Gen 2 User Guide
Advertisement
Table of Contents
