Related Manuals for NCR 1925
Summary of Contents for NCR 1925
- Page 1 NCR Kitchen Controller 5 (1925) Site Preparation Guide Publication ID: BCC5-0000-5554 Issue C Confidential and proprietary information of NCR. Unauthorized use, reproduction and/or distribution is strictly prohibited...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Preface This is a contractual document. It contains important information about properly preparing a site for the NCR Kitchen Controller 5 (1925). You are advised to read it carefully. It is the responsibility of the customer to assure that all installation preparations are complete and in compliance with NCR specifications and requirements and all applicable national, state, or local codes, regulations, and laws.
- Page 4 NCR will not be liable in respect to any comment, suggestion, or advice given by its staff or in respect to any failure to give advice.
- Page 5 AC Disconnect Warning A readily accessible and easily identifiable means of disconnecting power from the NCR Kitchen Controller 5 (1925) must be provided, such as a plug on the power cord, isolating switch, or circuit breaker incorporated in the building wiring.
- Page 6 If you experience an out of box failure (OBF) during installation or staging that is related to a missing, wrong or defective unit or item, or damage to the frame/cabinet of the unit, contact NCR and provide a detailed description of the issue.
- Page 7 1-800-528-8658 (USA) +1-770-623-7400 (International) Note When leaving a message, please provide a phone number and/or an email address so NCR can contact you if additional details are needed. Warranty Warranty terms vary by region and country. All parts of this product that are subject to normal wear and tear are not included in the warranty.
-
Page 8: Table Of Contents
Table of Contents NCR Kitchen Controller 5 (1925) Site Preparation Customer Responsibilities Third-Party Peripheral Certification LAN Communications Environmental Requirements Temperature, Humidity, and Dew Point Moisture Electrical Requirements AC Wiring Requirements Dimensions Weight Service Clearance and Airflow Requirements Mounting Options Confidential and proprietary information of NCR. - Page 9 Revision Record Issue Date Remarks Feb 2022 Initial release May 2022 Minor revisions on Weight, Dimension, and Service Clearance Mar 2023 Converted to Guild template Confidential and proprietary information of NCR. Unauthorized use, reproduction and/or distribution is strictly prohibited.
-
Page 10: Ncr Kitchen Controller 5 (1925) Site Preparation
NCR Kitchen Controller 5 (1925) Site Preparation This chapter provides the information necessary to prepare a site to NCR specifications prior to installing the NCR Kitchen Controller 5 (1925). The site must be properly prepared before the product is installed because site preparation deficiencies may be difficult to detect and correct after installation. -
Page 11: Customer Responsibilities
Provide and install floor coverings and environmental systems that limit or control static electricity build-up and discharge. In general, keep the NCR equipment area free from dust, smoke, lint, and other particles. Restrict smoking, eating, and drinking around the equipment. Avoid locating the equipment near other machines that generate ink, carbon, and paper dust particles. -
Page 12: Third-Party Peripheral Certification
Third-party peripherals must be certified with the NCR KC5 or a potential ESD issue can occur. Third-party peripherals include any electrically powered devices connected to the platform that are not an NCR-branded product or a certified solution advocated by NCR. Examples of third-party products include PIN pad devices, printers, external CD-ROM drives, and so forth. -
Page 13: Lan Communications
LAN Communications The NCR KC5 provides 10/100/1000 Mbps Ethernet support using Intel WGI210AT Ethernet controller on rear I/O, with link/speed LEDs. For Ethernet communications wiring specifications, refer to the NCR Ethernet Communication Wiring Guide document. Confidential and proprietary information of NCR. Unauthorized use, reproduction and/or distribution is strictly prohibited. -
Page 14: Environmental Requirements
Environmental Requirements The NCR Kitchen Controller 5 (1925) is designed to operate in a Class 3 working range, which applies to a broad spectrum of fully to partially conditioned office and commercial environments. Dependent upon local climatic conditions, heating, cooling and humidity control capability may not be provided at all or be inadequate to maintain desirable human comfort levels on a day-to-day basis under adverse climatic conditions. -
Page 15: Electrical Requirements
Electrical Requirements The NCR KC5 has the following external power supply options: US Power Supply (connects directly to a wall wart) International Power Supply These power supplies has an auto-switch feature that allows configuration for 115V or 230V operation. Output Level... -
Page 16: Dimensions
Dimensions Weight The maximum weight of the NCR KC5 is 2.54 lb (1.15 kg). Hardware weights can vary slightly based on the actual hardware configuration. Confidential and proprietary information of NCR. Unauthorized use, reproduction and/or distribution is strictly prohibited. -
Page 17: Service Clearance And Airflow Requirements
Requirements An area of no less than 11 x 7 in. (27.94 x 17.78 cm) is necessary to properly install the NCR KC5. This will accommodate the unit as well as its associated mounting hardware. Confidential and proprietary information of NCR. -
Page 18: Mounting Options
Mounting Options The NCR KC5 can be mounted using NCR kitchen integration brackets, or to the wall using the wall mount bracket. The integration brackets offer VESA standard mounting holes that can connect to an LCD monitor mount. The brackets prevents cable management issues and minimizes the chance for theft.