Yamaha PM5D Owner's Manual page 8

Q
R
S
Q Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
Note that while the channel number (
mode, the channel name display will change according to the pair mode.
For example if the CH1-24 layer is displayed, switching from Horizontal Pair mode to
Vertical Pair mode will change the channel name display from channels 1, 2, 3 ... 24, 25
to channels 1, 3, 5...45, 47.
R
Fader
Adjusts the input level of the input channel. This is linked with the INPUT channel
strip faders on the PM5D panel.
The current fader value is shown in the numeric box immediately below the fader. The
level meter at the right of the fader shows the level of the input signal.
The numbers and
alphabetical letters at
the right of the fader
indicate the DCA
group and mute
groups to which that
channel belongs, and
show the Recall Safe
and Mute Safe status of
the channel.
S CUE
This button cue-monitors the signal of the input channel. This is linked with the
INPUT channel strip [CUE] keys on the PM5D panel.
L
) will not change even if you switch the pair
The numbers of DCA groups to which this
channel belongs are shown in yellow.
The numbers of mute groups to which this
channel belongs are shown in red.
If this channel is set to Recall Safe, the R
character is shown in orange.
If this channel is set to Mute Safe, the M char-
acter is shown in red.
8 PM5D Editor Owner's Manual