Yamaha PM5D Supplementary Manual page 2

MIDI EVENT etc. data now
maintained during scene recall
The MIDI EVENT, GPI OUT CONTROL, and REMOTE
TRANSPORT data included in a scene is now maintained
when a scene recall occurs. This means that if you store a
recalled scene into another scene, this data will be stored as
it was when recalled.
DME series monitor source
selection and EXTERNAL CUE on/
off
A MONITOR button and monitor source select button
have been added to the DME CONTROL screen. When
you click the monitor source select button ( ), the
MONITOR POINT SELECT window will appear, letting
you select the DME series unit monitor source. If the
MONITOR button is on, the EXTERNAL CUE indicator
in the upper part of the display will turn on, and the
monitor signal of the DME series unit will be sent to the
PM5D's CUE bus.
Note
Before turning on the MONITOR button, you must select the
same port as the monitor output on the DME series unit and
as the monitor input for the PM5D. To specify the DME series
unit monitor output, use the "Monitor Out" dialog box of DME
Designer, accessed by [Tools] menu → [Monitor]. To specify
the PM5D monitor input, use the MONITOR PORT field on the
SETUP page of the DME CONTROL screen.
Newly added bulk dump data
types
The following data types can now be handled by bulk
dump.
Data name
Data Number (D1,2)
(D0)
512
'K'
(Current Data)
512-
'V'
(Current Data)
512-
'L'
(Current Data)
512-
'U'
(Current Data)
SETUP data compatibility
SETUP data created on system software V1.05 or later
cannot be loaded into a system that's running V1.03 or
earlier. However, SETUP data created on system software
V1.03 or earlier can be loaded by a system that's running
V1.05 or later.
A note regarding scenes/libraries
immediately after system startup
After the system is started up, the PM5D takes several
minutes to transfer scene/library data within internal
memory. (The time required depends on the amount of
data.) This means that the following restrictions apply
during this time.
• You can't execute the PASTE button in the GLOBAL
PASTE screen.
• You can't execute the scene memory UNDO function.
• Scene memory recall will take a bit of time.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
tx/rx Function
Surround Setting
tx/rx
& Request
User Defined Keys
tx/rx
& Request
MIDI Remote &
tx/rx
Request
Fader Mode &
tx/rx
Request
© 2004 Yamaha Corporation