Table of Contents
Advertisement
3-2. One Connect
Disassembly
„
Description & Screws
1
Remove one Phillips screw in top right corner of
bottom cover.
2
Use Open Jig release bottom cover starting at
the right side tabs.
3
Use Open Jig release SMPS on left side and
separate SMPS (DC VSS-POWER BOARD) from
housing.
4
Release Connector & SMPS (DC VSS-POWER
BOARD).
5
Use Open Jig & carefully release tabs and
remove OC Board (ASSY PCB OC).
3. Disassembly and Reassemble
Picture Description
Open Jig
SMPS
MAIN PCB
Open Jig
SMPS
SMPS
3-7
Advertisement
Table of Contents
