3. Disassembly and Reassemble
Description & Screws
16
Remove the DC VSS-PD BOARD.
•
Gently lift up (Bottom Right corner) to
release the lock.
•
Use both hands to hold the board and slide
to the left to release.
NOTE
When installing the DC VSS-PD BOARD,
verify the board is properly positioned in all 4
mounting slots.
17
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-6
Locking
Fixing Hole
Picture Description
Bottom chassis Guide Fixing Hole
Slide to the left to release the board
Locking
Locking