Holmes 32510394 Instruction Manual

FILE TYPE
ALL ARTWORK, DESIGN &
CREATIVE ARE PROPERTY OF:
1175 PLACE DU FRÈRE-ANDRÉ
MONTRÉAL (QUÉBEC)
CANADA H3B 3X9
1 800 890 4076
PKG FINISHING
Varnish (oil, gloss by default)
ARTWORK IS THE PROPERTY OF L'IMAGE HOME PRODUCTS INC. Printers changing Pantone spot colors to
CMYK do so at their own risk and expense. Print artwork at 100% from PDF supplied, unless otherwise
specified. Proofs/samples must be sent for approval before mass printing.
DO NOT CHANGE ARTWORK IN ANY WAY.
NOTE:
C L E A N I N G / M A I N T E N A N C E
USER SERVICING INSTRUCTIONS CLEANING/MAINTENANCE
Follow these instructions to correctly and safely care for
REPLACEABLE FUSE
this window fan.
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please
contact customer service for information on how to order
FAN CLEANING
a new fuse.
REPLACING THE FUSE • Always unplug the fan before cleaning
or disassembling.
Follow the below instructions to replace the fuse on
• Do not allow water to drip on or into the fan
the plug.
motor housing.
1. Unplug the fan.
• Use only a soft cloth moistened with a mild
Grasp plug and remove from the receptacle or other
soap solution.
outlet device.
• Do not use harsh chemicals such as gasoline, thinner
NOTE: Do not unplug by pulling on cord.
or benzene as a cleaner.
2. Open fuse cover, located on the top of the plug, by
• Do not attempt to remove the fan blade.
using your thumb or a flathead screwdriver to slide
• Use CAUTION around the motor housing area. Do not
the cover towards the prongs.
allow the motor or other electrical components to be
NOTE: Ensure the fuse
Figure 2
exposed to water.
cover is completely open Fuse
• It is recommended to periodically clean this fan by
before attempting to
Fuse cover
lightly running a vacuum cleaner nozzle over the fan
remove fuse.
grill to remove any dust or dirt.
3. Remove fuse carefully by
using a small screwdriver to
FAN STORAGE
pry it from the compart-
Metal ends
ment at the metal ends of
• It is recommended to use the original (or appropriately
the fuse. (See Figure 2)
sized) box.
4. Place plug on a solid, flat surface. Insert new 2.5
• Protect the fan from dirt, dust, and moisture.
Amp, 125 Volt fuse into fuse compartment. Use a
small screwdriver to secure the metal ends of the fuse
into the compartment.
For inquiries regarding recycling and proper disposal
CAUTION: Risk of fire. Replace fuse only with 2.5
of this product, please contact your local waste
Amp, 125 Volt fuse.
management facility.
5. Slide fuse cover closed completely.
NOTE: If fuse cover is difficult to close, make sure
the fuse is completely secured in place by pressing on
metal ends of the fuse.
CAUTION: Risk of fire. Do not replace the
attachment plug. It contains a safety device (fuse)
that should not be removed. Discard product if the
attachment plug is damaged.
PKG IM RL PDQ TRAY
COLOURS
DOCKET: KT-512
DATE: November 6, 2023
DIELINE
ITEM/SKU#: 12860
DESCRIPTION: Holmes 9in Digital Window
Fan with Reversible Airflow
CUSTOMER/RETAILER: Target
DESIGNER: RG
Aqueous Coating Matte Spot-UV
上光油 上水油
Gloss
BEFORE MASS PRODUCTION: ELECTRONIC PDF ARTWORK PROOF MUST
BE SENT TO L'IMAGE HOME PRODUCTS GRAPHICS DEPT FOR APPROVAL.
WA R R A N T Y I N F O R M AT I O N
FCC STATEMENT
Potential for Radio/Television interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a
particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by
turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
The following importer is the responsible party:
Company Name: SEG Products US Corp.
Address: 8 The Green, Suite #6962, Dover, DE 19901
Telephone: 1-959-202-4223
3 YEAR LIMITED WARRANTY
This device has a 3 Year limited warranty for the original purchaser from the date of purchase against workmanship and
defects in material. If under normal use, your product fails to operate, a replacement or refund will be provided to you
with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.
How to Obtain Warranty Service
If you have any problems, please do not contact the store.
Contact our customer service at:
www.getholmesfans.com
info@getholmesfans.com
1-866-769-3166 (8:30 am - 5:00 pm EST) Monday - Friday
Our customer service will be happy to assist you.
© 2024 Sunbeam Products, Inc. All rights reserved.
HOLMES is a registered trademark of Sunbeam Products, Inc. used under license.
®
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH026-010424
PROCESS COLOR PANTONE COLOR
BLACK
Matte
Other (See notes)
PP Lamination 覆膜
Gloss
Printed In China
DIMENSION
HEIGHT: 19 cm
WIDTH: 42 cm
PHOTOS
High Res Photo
Instruction Manual
9inch Digital Twin-Blade
Window Fan
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Item: 12860 / 12965 / 12972
Model: 32510394