Holmes 32510360 Instruction Manual

FILE TYPE
ALL ARTWORK, DESIGN &
CREATIVE ARE PROPERTY OF:
1175 PLACE DU FRÈRE-ANDRÉ
MONTRÉAL (QUÉBEC)
CANADA H3B 3X9
1 800 890 4076
PKG FINISHING
Varnish (oil, gloss by default)
ARTWORK IS THE PROPERTY OF L'IMAGE HOME PRODUCTS INC. Printers changing Pantone spot colors to
CMYK do so at their own risk and expense. Print artwork at 100% from PDF supplied, unless otherwise
specified. Proofs/samples must be sent for approval before mass printing.
DO NOT CHANGE ARTWORK IN ANY WAY.
NOTE:
O P E R AT I O N S / C L E A N I N G /
M A I N T E N A N C E
USER SERVICING INSTRUCTIONS FAN CLEANING
• Always unplug the fan before cleaning.
Follow these instructions to safely and correctly care for
• Do not allow water to drip on or into fan housing.
this fan.
• Use only a soft cloth moistened with a mild soap
REPLACEABLE FUSE
solution.
If the (2.5 Amp, 125 Volt) replaceable fuse blows, • Do not use harsh chemicals such as gasoline, thinner
or benzene as a cleaner.
please visit our website at www.getholmesfans.com
FAN BLADE CLEANING
for information on how to order a new fuse. Follow the
below instructions to replace the fuse on the plug.
1. Remove the front grill by opening the clips located
around the perimeter.
2. Clean the fan blade, front and rear grills with a soft
REPLACING THE FUSE
cloth moistened with a mild soap solution.
1. Unplug the fan.
3. Securely fasten the front grill to the rear grill by
Grasp plug and remove from the receptacle or other
closing the clips around the perimeter.
outlet device.
FAN HEAD, BASE AND POLE CLEANING
NOTE: Do not unplug by pulling on cord.
2. Open fuse cover, located on the top of the plug, by
Using a soft, moist cloth (with or without a mild soap
using your thumb or a flathead screwdriver to slide
solution), carefully clean the fan base, pole and head.
the cover towards the prongs.
Use CAUTION around the housing area. Do not allow the
NOTE: Ensure the fuse
motor or other electrical components to be exposed to
Figure 4
cover is completely open
water.
Fuse
before attempting to
Fuse cover
remove fuse. FAN STORAGE
3. Remove fuse carefully by
This fan can be stored either partially disassembled or
using a small screwdriver
assembled.
to pry it from the
• Store the fan in a clean, dry location between
Metal ends
compartment at the metal
seasons or when not in use for an extended period
ends of the fuse. (See Figure 4)
of time.
4. Place plug on a solid, flat surface. Insert new 2.5
• Keep the fan protected from dirt and dust during
Amp, 125 Volt fuse into fuse compartment. Use a
storage.
small screwdriver to secure the metal ends of the fuse
NOTE: This fan can also be used during the cold winter
into the compartment.
season to circulate warm air throughout your home.
CAUTION: Risk of fire. Replace fuse only with 2.5
Amp, 125 Volt fuse.
5. Slide fuse cover closed completely.
For inquiries regarding recycling and proper
NOTE: If fuse cover is difficult to close, make sure
disposal of this product, please contact your local
the fuse is completely secured in place by pressing
waste management facility.
on metal ends of the fuse.
CAUTION: Risk of fire. Do not replace the
attachment plug. It contains a safety device (fuse)
that should not be removed. Discard product if the
attachment plug is damaged.
PKG IM RL PDQ TRAY
DOCKET: KT-121
COLOURS
DATE: Dec 12, 2022
DIELINE
ITEM/SKU#: 12085
DESCRIPTION: 16in Chrome Digital Stand Fan
CUSTOMER/RETAILER: Ecom
DESIGNER: XL
Matte
上光油 Aqueous Coating 上水油 Spot-UV
Gloss
BEFORE MASS PRODUCTION: ELECTRONIC PDF ARTWORK PROOF MUST
BE SENT TO L'IMAGE HOME PRODUCTS GRAPHICS DEPT FOR APPROVAL.
F C C S TAT E M E N T /
WA R R A N T Y I N F O R M AT I O N
FCC STATEMENT
Potential for Radio/Television interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If the product does cause harmful interference to radio or
television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The following importer is the responsible party:
Company Name: SEG Products US Corp.
Address: 8 The Green, Suite #6962, Dover, DE 19901
Telephone: 1-959-202-4223
3 YEAR LIMITED WARRANTY
This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in
material. If under normal use, your product fails to operate, please contact our customer service department at
info@getholmesfans.com. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may
deny claims of damage caused by misuse or modifications of this product.
Warranty Service
Contact our customer service at www.getholmesfans.com/en/contact-us
or info@getholmesfans.com or 1-866-769-3166 (8:30 am - 5:00 pm EST) Monday-Friday.
Our team will be happy to assist.
www.getholmesfans.com
© 2023 Sunbeam Products, Inc. All rights reserved.
HOLMES is a registered trademark of Sunbeam Products, Inc. used under license.
®
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH022-013023
PROCESS COLOR PANTONE COLOR
BLACK
Matte
PP Lamination 覆膜 Other (See notes) High Res Photo
Gloss
16 Inch
Digital Stand Fan
Printed In China
DIMENSION
HEIGHT: 19 cm
WIDTH: 42 cm
PHOTOS
Instruction Manual
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Item: 12085
Model: 32510360