Yamaha LS9 Editor Owner's Manual page 63

CUSTOM FADER LAYER METER page
A
METERING POINT
This selects the point at which the signal levels will be displayed. You can choose from the following metering
points for input channels and for output channels.
IN: PRE HPF, PRE FADER, POST ON
OUT: PRE EQ, PRE FADER, POST ON
B
PEAK HOLD
This is the same function as in the INPUT METER page.
C Meters
These are peak level meters that show the input level of each channel. The box below shows the current fader
value, and the box below that shows the ID of the assigned channel.
If clipping occurs at even one of the multiple detection points in each channel, the
1 2
63
3
∑
segment will light.
LS9 Editor Owner's Manual