Yamaha LS9 Editor Owner's Manual page 55

CInput patch
3 4
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the input channel(s) of the currently selected GEQ module. This is linked
with
NONE
MIX1–16
MATRIX1-–8
ST L, ST R, MONO(C)
INS CH 1–32
INS MIX 1–16
INS MATRIX1–8
INS ST L, INS ST R, INS MONO(C)
(*)
The channel name is shown in the boxes immediately below.
D
Input meter
This indicates the level of the signal that is being input to the currently selected GEQ
module.
E Output patch
5 6
Click the CHANNEL field, and choose one of the following as the signal route that will
be patched to the output channel(s) of the currently selected GEQ module. This is
linked with
NONE
IN CH 1–64
STIN1L-STIN4R
INS CH 1–32
INS MIX 1–16
MATRIX INSERT1–8
INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel
(*1)
(*2)
The channel name is shown in the boxes immediately below.
F Output meter
This indicates the level of the signal that is being output to the currently selected GEQ
module.
5
Output Patch
(*)
(*)
(*)
Displayed only, and cannot be selected.
3
Input Patch.
(*1)(*2)
(*2)
INPUT CH 33–64 can be displayed only if you're editing offline and have selected LS9-32 in the Model
Select field of the Mixer Setup window, or if you are editing online with the LS9-32 connected.
Displayed only, and cannot be selected.
55
No assignment
MIX channel 1–16
MATRIX channel 1–8
STEREO channel L/R, MONO channel
INPUT CH 1–32 insert out
MIX channel 1–16 insert out
MATRIX channel 1–8 insert out
Insert-out of STEREO channel L/R or the MONO chan-
nel
No assignment
(*1)
INPUT jacks 1-64
L/R channels of ST IN jacks 1–4
INPUTCH 1–32 insert in
MIX channel 1–16 insert in
MATRIX channel 1–8 insert in
LS9 Editor Owner's Manual