KitchenAid KEBI141 Use And Care Manual page 23

SELF-CLEAN CYCLE OPTIONS
• Delaying the Automatic Self-Clean Cycle
The start of the Self-Clean cycle can be postponed to a nnore convenient time, if desired.
The controls may be set to delay the Self-Clean cycle for up to twelve hours. Follow steps
1,2, 3 and 4 under "TO START THE AUTOMATIC SELF CLEAN CYCLE," then:
1. Turn the TIME knob until the desired new start time appears in the Display Window.
2. Touch the START button to lock in that time as the new start time. "STOP TIME" and the
actual cleaning stop time,
2
y
2
hours from the selected start time, will appear in the
Display Window.
3. Touch the START button to lock in the stop time and return the clock to the present time
of day. "AUTO" will flash in the Display Window until the cleaning cycle begins. Once the
cycle is in progress, "AUTO" will appear continuously. No end of cycle tone will be given.
• Extending the Automatic Self-Clean Cycle
If your oven is excessively dirty and requires longer cleaning time, the Automatic Self-Clean
cycle can be extended for up to 4 hours. Follow steps 1,2,3,4 and 5 under "TO START
THE AUTOAAATIC SELF-CLEAN CYCLE," then:
1. When "STOP TIME" appears in the Display Window, turn the TIME knob to the right until
the desired length of cleaning time is displayed. Remember—you will be adding time to
the normal 2 '/z hour cleaning time; a time longer than 4 hours total cannot be selected.
2. Touch the START button to lock in the new stop time and return the clock to the present
time of day.
3. "AUTO" will appear in the Display Window and the cleaning cycle will begin. No end of
cycle tone will be given.
• Combining the Delay and Extended Self-Clean Cycle Options
An automatic Self-Clean cycle can be both delayed and extended if desired. Follow steps
1,2,3 and 4 under "TO START THE AUTOMATIC SELF-CLEAN CYCLE," then:
1. Set the delayed start time by turning the TIME knob until the new start time appears in
the Display Window.
2. Touch the START button to lock in the new start time. The display will show "STOP
TIME" and the automatic preset cleaning stop time. Turn the TIME knob until the new
cleaning stop time appears in the Display Window.
3. Touch the START button again to lock in the new stop time and return the clock to the
present time of day.
4. "AUTO" will flash in the Display Window until the cleaning cycle begins. Once the cycle is
in progress, "AUTO" will appear continuously. No end of cycle tone will be given.
23