Maintenance; Symbols On The Product - Ryobi R18BT12V Instructions Manual

Table of Contents

Advertisement

product. Do not force plugs into the
product.
Do not put foreign objects into the
product.
BATTERY INVERTER SAFETY
WARNINGS
Remove the battery pack from the
product when not in use.
To reduce the risk of injury, close
supervision is necessary when the
product is used near children.
Store the product indoors and away
from children.
If the product is used in a manner
not specified by the manufacturer,
the protection provided by this
equipment may be impaired.
Do not overload the product. The
product must be used for powering
devices less than the product rating.
Never block the air vents. Blocked
vents may cause overheating. The
product automatically turns off when
overheated.
Keep the product cool. Do not place
the product near heat vents or in
direct sunlight.
Do not use the product around
flammable fumes and gases, such
as in the bilge of a boat or near
propane tanks.
The product should never be hard-
wired into a circuit.
Do not leave the product unattended
during operation.
Operate
the
product
temperatures between -15 °C and
40 °C.
Do not use the product to power life
support devices or other medical
equipment.
An internal cooling fan runs to
regulate the product's operating
temperature. Always wait for the
fan to stop before disconnecting the
battery pack from the product.
Use RYOBI 18V ONE+ battery
packs only. Do not use battery
packs from other manufacturers.
The light source of the product is not
replaceable. When the light source
reaches its end of life, the product
must be replaced.
Store the product in a location where
the ambient temperature is between
15 °C and 60 °C.

MAINTENANCE

Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to damage from various
types of commercial solvents and
may be damaged by their use. Use
clean cloths to remove dirt, dust, oil,
and grease.
Do not, at any time, let brake
fluids, gasoline, petroleum-based
products, and penetrating oils come
in contact with plastic parts. These
products contain chemicals that can
damage, weaken, or destroy plastic.

SYMBOLS ON THE PRODUCT

only
in
Safety alert
Read and understand
all instructions before
operating the product.
Follow all warnings and
safety instructions.
Original Instructions
3

Advertisement

Table of Contents
loading

Table of Contents