Maintenance - Ryobi FVB03 Operator's Manual

LED INDICATOR
The LED indicator shows the charge status of the battery pack
when connected to a USB-C cable.
BATTERY CHARGING STATUS
LED
FLASHING GREEN
SOLID GREEN
FLASHING RED
BATTERY FUEL GAUGE
To display the amount of charge available in the battery, firmly press
the charge level indicator button. The LED indicator will light up
to show the amount of charge available in the battery for charging
external devices.
BATTERY FUEL GAUGE
LED
SOLID GREEN
SOLID ORANGE
SOLID RED
FLASHING RED
CHARGING A USB CHARGEABLE DEVICE
See Figure 1.
The battery pack can charge small devices.
 Remove the battery pack from the tool, if applicable.
 Insert the USB-C cable into the battery pack as shown.
 Connect the USB-C cable to a USB chargeable device.
 Remove the USB-C cable from the battery pack once charging
is complete.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A
hot battery pack may not flash while plugged in to charge. Charging
will not begin until the battery temperature cools to within acceptable
range and the LED begins to flash. If the pack does not begin to charge
after 30 minutes, the battery or USB-C cable may have an error. For
standalone chargers, please refer to charger operator's manual.
CHARGING A COLD BATTERY PACK
A cold battery pack may not flash while plugged in to charge.
Charging will not begin until the battery temperature warms to
within acceptable range and the LED begins to flash. If the pack
does not begin to charge after 30 minutes, the battery or USB-C
cable may have an error. For standalone chargers, please refer to
charger operator's manual.
BATTERY STATUS
Charging
Fully Charged
Error
BATTERY CHARGE AVAILABLE
66 - 100%
26 - 65%
1 - 25%
<1%

MAINTENANCE

For battery pack storage longer than 30 days:
 Store the battery pack where the temperature is between 50°F
to 80°F and away from moisture.
 Store battery packs in a 30%-50% charged condition.
 Every six months of storage, charge the pack as normal.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natural resources, please recycle or
dispose of batteries properly.
This product contains lithium-ion batteries. Local,
state or federal laws may prohibit disposal of lithium-
ion batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
WARNING!
Upon removal, cover the battery pack's terminals with heavy-
duty adhesive tape. Do not attempt to destroy or disassemble
battery pack or remove any of its components. Batteries must
be recycled or disposed of properly. Also, never touch both
terminals with metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to comply with
these warnings could result in fire and/or serious injury.
SAVE THESE INSTRUCTIONS
2 - English
LED
INDICATOR
USB-C CABLE
(NOT INCLUDED)
CHARGE LEVEL
INDICATOR BUTTON
Fig. 1