IBM eServer xSeries 255 Installation Manual page 11

Statement 6:
CAUTION:
If you install a strain-relief bracket option over the end of the power cord that is
connected to the device, you must connect the other end of the power cord to
an easily accessible power source.
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any compo-
nent that has this label attached. There are no serviceable parts inside these
components. If you suspect a problem with one of these parts, contact a ser-
vice technician.
Statement 13:
DANGER
Overloading a branch circuit is potentially a fire hazard and a shock haz-
ard under certain conditions. To avoid these hazards, ensure that your
system electrical requirements do not exceed branch circuit protection
requirements. Refer to the information that is provided with your device
for electrical specifications.
ix
Safety