Creating A Drum Kit - Yamaha DTXTREME Owner's Manual

Creating a Drum Kit

You can create your own original drum kits by choosing the drum voices to be included,
then applying tuning, attack, decay, reverb level and other settings. You can then store your
drum kit as one of up to 40 User Drum Kits. A further 99 drum kits can be stored on the
Memory Card. Here, we'll go through the basics of creating a drum kit.
n The following procedure explains the settings for a snare drum voice.
1. Select a drum kit
PLAY
n If you are creating a new drum kit similar to existing one, it's useful to select it for fast creation.
2. Enter Drum Kit Voice Edit mode and use the Page
[Voice1] page
3. Select the pad for the drum voice you wish to change
When you hit a pad, the LCD displays the voice assigned to it. We will be using the snare
drum voice in this example, so hit the pad assigned to this voice.
n In Utility mode, if the "Learn" mode in the [UT5] page (page 73, Reference Section) has been set to
"always," the appropriate input is automatically selected when you hit a pad. This simplifies the input
(pad) selection procedure.
VOICE
40
and buttons to go to the