Advertisement
5
Installation
To mount the propeller blades together, at first the blades are placed onto a table, where
they will be aligned and adjusted. Then the blades will be fitted into each other.
2-blade propeller:
3-blade propeller:
4-blade propeller:
Figure 3 to 11:
Adjustment of the blades
Please note: The Blades for the 4-Blade Propeller have to be adjusted according to the
label; the paired Blades have to be opposite!
Warning:
At this point it has to be checked that the tailing edge of all Blades is in
right position in turning direction – backside aligned.
Manual H25F
Ausgabe 13.11.2018
page 7 / 10
Advertisement
