Initial Setup; Using The Tv Controller; Troubleshooting And Maintenance - Samsung QE43LS03AAUXZT User Manual

03 Initial Setup

When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on the
screen and configure the TV's basic settings to suit your viewing
environment.
• When installing the 43LS03A model as a wall mount, it can be
installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimised for landscape mode.

Using the TV Controller

You can turn on the TV with the TV Controller button at the lower
right rear corner of the TV, and then use the Control menu. The
Control menu appears when the TV Controller button is pressed
while the TV is On.
• The screen may dim if the protective film on the bottom of the
TV is not detached. Please remove the protective film.
Control menu
TV Controller button / Remote control sensor / Motion
Sensor
• TV mode
– Press: Move
– Press & Hold: Select
• Art mode
– Press: Switch to the TV mode.
• In Art mode, the Remote control sensor at the bottom of the
TV remains off.
English - 6
Setting the sound sensor
You can turn on or off the sound sensor by
using its switch at the lower right rear corner
of the TV.
With the TV on, slide up the switch to turn
the sound sensor on or down the switch to
turn it off.
See the pop-up window on the TV to check whether the sound
sensor is turned on or off.
• During analysis using data from the sound sensor, the data is
not saved.
04 Troubleshooting and
Maintenance
Troubleshooting
For more information, see "Troubleshooting" or "FAQ" in the
e-Manual.
> Settings > e-Manual > Troubleshooting or FAQ
If none of the troubleshooting tips apply, please visit "www.
samsung.com" and click Support or contact the Samsung service
centre.
• This TFT LED panel is made up of sub pixels which require
sophisticated technology to produce. There may be, however,
a few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
• To keep your TV in optimum condition, upgrade to the latest
software. Use the Update Now or Auto update functions on
the TV's menu ( > Settings > Support > Software Update
> Update Now or Auto update).
The TV won't turn on.
• Make sure that the AC power cable is securely plugged in to
the One Connect Box and the wall outlet.
• Make sure that the wall outlet is working and the remote
control sensor at the bottom of the TV is lit and glowing a
solid red.
• Try pressing the TV Controller button at the lower right rear
corner of the TV to make sure that the problem is not with the
remote control. If the TV turns on, refer to "The remote control
does not work".