Edit Menus - Yamaha AN200 Manual

Edit Menus

When the AN200 is active and selected, the following functions appear in the Edit menu:
• AN200 Store
• AN200 Pattern List
• AN200 Librarian
Use the AN200 Store dialog box to store the pattern currently being edited to one of the
User pattern memory spaces. Once a pattern or patterns have been stored in this way,
you can save the entire set of 128 User patterns to an
• "AN200 Store"can also be selected from the
main control panel pressing control key, or by clicking on the
To store a pattern:
1) Click the desired location for the newly edited pattern.
2) Click "Store" to store the pattern to the selected location. Keep in
mind that this replaces (and erases) the pattern at the location with
the newly edited one.
• Keep in mind that this operation stores your pattern data only into the User pattern memory
of the AN200 Editor and sends the current pattern's bulk data to the AN200. The current pat-
tern bulk data will be lost if you select another pattern on the panel of the AN200. If you want
to select a pattern on the panel of the AN200, you should first transmit the User Pattern.
(Refer to
Data if you select a pattern in the Pattern List of the AN200 Editor, since the current pattern
bulk data is sent with that operation.
AN200 Store
Transmit AN200 Bulk Dump
AN200 File.
master menu by clicking any inactive part of the
STORE
Data.) There is no need to transmit AN200 Bulk Dump
63
button.