Table of Contents
Advertisement
Parameters /
Ctrl (Control) Matrix Parameter Tab
Effect Block
• PARAM (Parameter)
Settings: 0 ... 127
This determines the degree for the effect selected in Type below.
• TYPE
Settings: Delay 1-3, Reverb, Flanger 1-2, Chorus, Phaser 1-3,
Determines the Effect type.
COMMON Block
• TEMPO
Settings: 20 ... 300 bpm (beats per minute)
The Tempo setting determines the tempo for the AN200's internal clock in beats per
minute (BPM), between a range of 20 and 300 BPM. The Tempo setting controls both
Step Sequencer playback.
• When the
will be synchronized with the Tempo set here.
• BEAT
Settings: 8, 12, 16
Determines the number of steps in the selected Sequence for playback.
• SWING
Settings: 50 ... 83%
The Swing parameter lets you apply a Swing rate to the Sequence to slightly shift certain
beats in order to create a "swing" feel. A setting of "50%" produces no Swing and "83%"
produces maximum Swing. For information about how the Swing levels affect the rhythm
of the Sequence, see the illustration below.
• REVERSE
Setting: On, Off
This function lets you completely turn the Sequence around, and play all the notes back-
wards.
AmpSim(Amp Simulator) 1-3
Free EG Length
parameter is set to one of the "bar" values, the Free EG sequence
56
Advertisement
Table of Contents
