Giving The Patch A Name; Giving The Patch A Name (Name Edit Mode) - Yamaha Acoustic User Manual

Giving the patch a name

Giving the patch a name (Name Edit Mode)

You can use up to 12 characters when making a name for a User Patch.
* Names of Preset Patches (P01-P99) can not be changed.
q
Press the [STORE/EXIT] button.
"PRESS[STORE]1sec" appears in the lower half of the display.
w
Press and hold the AFR/ON/OFF switch until "NAME EDIT MODE" appears on
the display.
The cursor appears below the first character of the patch name.
* The MAGICSTOMP will enter the Deep Edit Mode if the AFR/ON/OFF switch is released before "NAME
EDIT MODE" appears on the display, (
e
Move the cursor to change characters.
Use the – and + switches to move the cursor to the character you want to change, then use the
three knobs to select the character.
The characters that can
be set with each knob
• Moves the cursor to the left
( )
• Press simultaneously with
the [STORE/EXIT] button
to delete the character
selected with the cursor.
* Holding down the switch (and
button) repeats the same opera-
tion continuously.
20
Press and hold
Cursor
to
(space)
page 15).
to
to
(space)
Current patch number
Cursor
(space)
• Moves the cursor to the
right ( )
• Press simultaneously
with the [STORE/EXIT]
button to insert a space
where the cursor is.
* Holding down the switch (and
button) repeats the same op-
eration continuously.