Table of Contents
Advertisement
ВАМК СОРҮ
SMPTE OFFSET
This job copies all tempo data from the currentiv selected bank to anv other specified
bank.
1.
Inthe EDIT mode (press the EDIT key), press the JOB key, enter "6" and press
ENTER.
2.
Enter the number of the bank (0 — 9) to which you want to сору the data from
the currentiv selected bank via the 10-key pad or by using the YES> and <NO
kevs.
3.
Press ENTER to сору the data and return to the EDIT mode.
If the destination bank already contains data, the "Sure?" display will appear.
In this case, press YES and the copy operation will be executed.
Г Ае,
=
Enter '6'
Fa
Enter bank no.
ENTER
7
The SMPTE OFFSET job makes it possible to offset playback of the recorded tempo
data in relation to the received time code by any amount. This is handy for making
slight adjustments in the sync timing of the MIDI output, or for re-synchronizing
the MIDI data to a newly-recorded SMPTE time code track.
1.
2.
In the EDIT mode (press the EDIT key), press the JOB key, enter "5" and press
ENTER.
Enter the desired offset hour via the 10-key pad when the "Set hour" display
appears on the LCD, then press ENTER.
Enter the desired offset minute via the 10-key pad when the "Set minute" display
appears on the LCD, then press ENTER.
Enter the desired offset second via the
10-key pad when the "Set second" display
appears on the LCD, then press ENTER.
Enter the desired offset frame via the 10-key pad when the "Set frame" display
appears on the LCD, then press ENTER.
Enter the desired offset bit via the
10-key pad when the "Set bit" display appears
on the LCD, then press ENTER.
€ Press the STOP key to exit and cancel at any stage before the last step is per-
formed.
ES
=
Enter "5"
28
Advertisement
Table of Contents
