Table of Contents
Advertisement
4: PLAVBACK
Two modes of playback аге available: non-sync апа chase. In the former case, playback is based on internally
generated time code and can be used for rehearsing and refining playback of the recorded tempo data. The second,
chase (synchronized) mode, is used to synchronize the MSS1
to audio or video tape playback.
A
и 7
NON-SVNC
2.
PLAVBACK
3.
4.
1.
CHASE-MODE
SVNCHRONIZED
x
PLAYBACK
4.
Press the PLAY key to enter the PLAY mode.
If the SYNC
LOCK indicator is lit, press the CHASE key, press the NO key to
select <OFF>, then press ENTER to set the CHASE mode OFF and return to
the PLAY mode. The SYNC LOCK indicator should now be out.
Press the START key. The internal time code generator will begin running and
the current time will be displayed on the TIME CODE
LED display. The pro-
grammed
MIDI tempo data will be transmitted via the MIDI OUT terminal in
synchronization with the internally generated time code.
Playback will stop when the end of the recorded tempo data is reached. The
STOP key may be pressed to stop playback at any time.
SYNC LOCK indication ON
GT.
i^
3
ENTER
CF
S
SYNC indication OFF
Ш Е Л .
Fl
Make sure that the output from the time code track on the recorder is connected
to the SMPTE
IN terminal on the MSSI.
Press the PLAV kev to enter the PLAV mode.
If the SYNC LOCK indicator is not lit, press the CHASE key, press the YES key
to select «ON», then press ENTER to set the CHASE mode ON and return to
the PLAY mode. The SYNC LOCK indicator should now be lit.
Press the START key. The SYNC LOCK indicator will go out and the "Waiting!"
display will appear on the LCD.
21
Advertisement
Table of Contents
