Changing Brightness Of The Display - Yamaha CDC-505 Owner's Manual

Changing brightness of the display

If desired, you can change brightness of the display
in three degrees by pressing the DIMMER button.
CDC-905 only
Adjusting the level of signals output into an
amplifier, etc.
You can adjust the level of sound signals output from the LINE
OUT terminals on the rear panel into an amplifier, etc. as you
prefer by using the OUTPUT LEVEL buttons.
(On the front panel)
For optimum sound quality
* When the DIGITAL AUDIO OUT (OPTICAL) terminal is used
for the connection, set the level of output signals to max.
* The level of output signals can be checked in the display.
12
– +
OUTPUT LEVEL
or
OUTPUT LEVEL
– +
Normal illumination
DIMMER
Slightly dim
CDC-905 only
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL buttons.
* Note that the use of the OUTPUT LEVEL buttons will also
vary the level of the signal output to an amplifier, etc.
Dim
PHONES