Disc Title - Yamaha CDC-505 Owner's Manual

Scanning discs to search for a desired disc (or to check discs on the disc tray)
When the DISC SCAN button is pressed in stop mode, this unit
will play a section of each disc in turn for 8 seconds.
If, during this play, you find a disc that you want to listen to,
press the DISC SCAN button once again or press the PLAY
button to cancel this function. The unit will enter into the normal
play mode.
Notes
During this play, the disc tray numbers blink in the display.
Every time the play of a disc is finished, the corresponding
tray number is changed from flashing to lighting.
Selecting time displays and the text data
You can select any of the four time displays by pressing the TEXT/TIME display mode-select button. When you play a CD with CD
TEXT, the disc title, artist name, and track name are also displayed. Each time you press the TEXT/TIME display mode-select
button, the display changes as follows.
Elapsed time of the track now playing
Remaining time of the track now playing
Total disc play time
Total remaining time on the disc Total remaining time on the disc
Notes
The remaining time will not be displayed if the track
number is 21 or higher.
The disc title, artist names, or track names may not be
displayed with some CD TEXT discs. In this case, "(NO
ENTRY)" appears in the display.
5DISCS
2 3 4 5
6 7 8 9 10
11 12
5DISCS
2 3 4 5
6 7 8 9 10
11 12
5DISCS
2 3 4 5
6 7 8 9 10
11 12
5DISCS
2 3 4 5
6 7 8 9 10
11 12
DISC SCAN
If the disc being played has a long blank space between
tracks, you will hear no sound during disc scan.
Track name
Artist name
TEXT/
TIME

Disc title

:when playing back a disc without CD TEXT
:when playing back a CD TEXT disc
11