Technical Specifications - Crate TD-70 User Manual

TD-70 TECHNICAL SPECIFICATIONS
Output Power Rating 70 wattsRMS @ 5% THD 8 ohm minimum load
Speaker Size and Rating TD-70 Custom Design 12"
TD-70S Celestion G12M-70 12"
Input Impedance 230K ohms/"0dB" input
242K ohms/" — 6dB" input
Maximum Input Signal 5 volts, p-p/"0dB" input
Level Accepted 10 volts, p-p/"—6dB" input
Total System Gain Channel A: 100dB @ 1KHzall controls at "10"
Sub, Focus, Lead @ "0"
Channel B:81dB @ 1KHzall controls at "10"
Bright off
Signal to Noise Ratio Channel A: 42dB with all controls at "10"
Sub, Focus, Lead @ "0"
Channel B: 63dB with all controls at "10"
Bright off
Sub Control 9dB Boost @ 80Hz
Focus Control Proprietary circuit
Lead Control 9dB Boost @ 3KHz
Low Control 10dB Range @ 100Hz
Mid Control 15dB Range @ 500Hz
High Control 15dB Range @ 7KHz
Input Power Requirements 120VAC, 60Hz, 200 watts max
Preamp Tube 12AX7
Cabinet Size and Weight 17-1/2"H x 20-1/4"W x 9-3/4"D, 34 Ibs.
Specifications subject to change without notice.
(CAUTION: To reduce the risk of electric shock, do not open chassis. No user serviceable parts inside. Refer servicing to qualified service personnel.
47-597-01