Advertisement
ee00000:;
tt
1
2
3
4
5
6
Channel
Select
ou
7
8910 11
12
13
Tube Driven 70
TEtttttttt
ttt t
14
15
16
17
18
19
20
21
FRONT PANEL-INPUT SECTION
1.
0dB Input Jack accepts a standard
1/4" phone plug and is suited for any
low to line level signal source.
2.
-—6dB Input Jack is a padded
6dB
for accepting hotter inputs. If both
Jacks are used, this input is not padded
and will be equal to the 0dB input.
CHANNEL A CONTROLS
3.
Drive adjusts the level at which the
12AX7 tube is driven. This control al-
lows a full distortion range: minimal
distortion at 0 - thick blues distortion
at 5 - and full blown metal crunch at
10.
4.
Level controls the overall volume of
Channel A.
5.
Sub adjusts the amount
of low fre-
quency tone in Channel A.
6.
Focus
adjusts the general tone of
Channel
A.
Counterclockwise
em-
phasizes
mid-range
frequencies and
clockwise emphasizes low and high
frequencies.
7.
Lead adjusts the amount of high fre-
quency tone or "presence" in Channel
A.
CHANNEL SWITCHING CONTROLS
8.
The Red LED is the Channel A indi-
cator.
9.
The Channel Select switch controls
channel switching. It is disabled if an
external
footswitch
is used
In the
footswitch jack (#17).
10. The Green LED is the Channel B indi-
cator.
CHANNEL
B CONTROLS
11. Volume sets the overall volume level
of Channel B.
12. Low controls the amount of bass in
the clean Channel B.
13. Mid allows attenuation and boosting
of the mid range.
14. High
controls
the upper
frequency
tone of Channel B. Used In conjunc-
Advertisement
