Table of Contents
Advertisement
3. Use the
and
required time; press and hold to advance
more quickly.
4. Timed cooking will start a few seconds after
the last selection.
5. When the time elapses, a series of beeps
will sound. Press the
deactivate the buzzer.
• This function can be activated on
multiple cooking zones at the same
time.
• When the timer of another cooking
zone is activated, the
the previously selected zone will
dim slightly.
Modifying or deactivating timed cooking
To modify or reset timed cooking, simply follow
the same instructions for modifying or resetting
the minute minder timer. If several timed cooking
functions have been set, press the
buttons at the same time to move between the
timers of each zone and modify them one by
one.
Each selected timer is indicated by the
at full brightness, while the other icons are
partially dimmed.
An independent timer can always be
set during one or several timed cooking
functions.
Rapid heating
This function is not available for power
the Warming, Booster and Double
Booster functions.
This function heats a cooking zone to the
maximum and allows it to reach the heat
corresponding to the selected power level more
quickly.
After selecting a cooking zone:
1. Press and hold the scroll bar at the required
power level (1 to 9) for at least 3 seconds.
2. The
symbol appears on the display of
the zone alternating with the selected power
level.
3. After the heating time has elapsed, the
cooking zone reverts to the previously
selected power level.
91477A183/C
buttons to select the
or
button to
icon of
and
icon
This function can be deactivated by selecting
and a different power level or by switching the
appliance off.
Pause function (on some models only)
This function allows you to pause the operation
of all the cooking zones.
To activate the Pause function:
1. With at least one cooking zone active, press
the
and
buttons at the same time.
2.
appears on the displays of all the
cooking zones.
The Pause function can be maintained
for a maximum of 10 minutes, after
which the appliance switches off.
To deactivate the Pause function:
1. Press the
and
animation appears on the rear right zone
scroll bar.
2. Move your finger from left to right on the
scroll bar.
3. The Pause function has now been
deactivated and the previously set functions
are restored.
The cooking time limitation, the residual
heat indicators and the Controls Lock
function remain enabled during the
Pause function.
Recall Function (on some models only)
This function can only be used if at least
one cooking zone was active at the
time of the unintentional switch-off.
This is used to restore some functions that have
already been started after the appliance has
been switched off unintentionally.
In this case, carry out the following procedure
within 6 seconds:
1. Switch on the appliance.
• The LEDs above the
start to flash.
2. Press the
and
time to restore the functions that were
previously active.
The Recall function only allows the following
functions to be restored:
1 Functions and power levels of the cooking
zones.
buttons together. An
and
buttons
buttons at the same
USE - 17
Advertisement
Table of Contents
