Polaris RZR 570 2017 Owner's Manual For Maintenance And Safety page 41

Park Brake Lever (if equipped)
Always apply the service brakes before engaging or releasing the park
brake. To help prevent the vehicle from rolling, set the park brake when
parking the vehicle. When the park brake is set and the park brake
indicator is illuminated, engine speed is limited. If the accelerator is
applied, this limiting feature prevents operation, which protects the park
brake pads from excessive wear.
Tip: This feature will not operate
properly if the park brake
connector or switch (under the
hood) malfunctions or
becomes disconnected, or if
the switch has moved. Check
for disconnection, then see
your dealer or other qualified
service person promptly if this
feature fails to operate
properly.
1. To set the park brake, apply
the brakes.
2. Pull the park brake lever
upward as far as possible.
3. To release the park brake,
apply the brakes. Press the
park brake release inward
and move the lever
downward as far as possible.
FEATURES AND CONTROLS
Park Brake
Lever
Park Brake
Release
37