How To Use - Panasonic ER-RP40 Operating Instructions Manual

How to use

You should not allow permanent wave lotion, hair dyeing
or hair spray to come into contact with the main body or
the blade.
Doing so may result in cracking or corrosion.
1. Hold the protective cap to pull it out.
2. Turn on the power switch, and start
trimming.
(How to use with
attachment, see
page 14.)
Trimming wet hair
3. Slide the power switch to off position
at the end of each use.
- Failure to do so may cause blade to
the skin.
Do not use the eyebrow comb and
detail attachment when trimming wet
hair.
Wet and apply soap beforehand to the
area to be shaved.
Clean the appliance after each use.
lose sharpness.
(See page 15)
Skin
11