Table of Contents
Advertisement
16
Highlight [Address] and press 2.
You will be prompted to enter an IP address.
17
Enter the remote camera IP address.
Enter the remote camera IP address you noted in Step 6.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press
J to save changes.
Press X to add the remote camera to the master camera
remote camera list and establish a connection.
Tip: Viewing Remote Camera IP Addresses
To view a remote camera's IP address, select [Connect to other
cameras] > [Network settings] in the camera's network menu,
highlight a synchronized release host profile, press 2, and
select [TCP/IP].
18
Add the remaining remote cameras.
The master camera shows the group name (q) selected in
Step 12 as well as the number of remote cameras connected
and not yet connected (w).
84
Changes to Synchronized Release
Advertisement
Table of Contents
