Sony CDP-CA70ES Operating Instructions Manual page 15

Playing CDs
6 Press ENTER to select the track. Checking the track order ri
Last programmed —Playing order You can check your program before or after you start
playing.
Press CHECK.
Programmed tracks
Each time you press this button, the display shows the
track (the disc and track numbers) or the disc (the disc
number and "AL" indication) of each step in the
After one second programmed order. After the last step in the program,
J the display shows "- END —" and returns to the
Total playing time
original display. If you check the order after you start
playing, the display shows only the remaining steps.
Changing the track order
You can change your program before you start playing.
7 To program other discs or tracks, do the following:
To program Repeat Steps To
You need to
All tracks on other discs 2 through 4 Erase a track
Other tracks on the same disc 5and 6
Press CHECK until the track
you don't want appears in
the display, then press
CLEAR (or M on the player)
Other tracks on other discs 2 through 6
Erase the last track in the
program
8 Press W (the indicator lights up green) to start
Program Play.
Add tracks to the end of the
program
To cancel Program Play
Press CONTINUE. ee program
su
"P You can select a track directly using the number
buttons
Press the number button of the track in Step 5. To select a
track numbered over 10, use the >10 button (see page 11).
i
je
You can create your program while checking the disc
labels
While the disc tray is open, follow Steps 1 to 8 with
pressing the DISC SKIP button to check the disc labels. If
you close the disc tray before Step 8, the total playing
time appears in the display after a while.
Note that, if the programmed track number isn't found
on the disc, that step is automatically erased.
Note
The total playing time doesn't appear when:
—You have programmed a track whose number exceeds 20.
—The total playing time of the program exceeds 200 minutes.
Press CLEAR (or M on the
player). Each time you press
the button, the last track will
be cleared.
Follow the programming
procedure
Hold down CLEAR until
"CLEAR" appears in the
display. Create anew
program following the
programming procedure.
15