Attaching The Grille; Mounting The Speakers - Yamaha NS-AW570 Owner's Manual

Indoor / outdoor speaker system

Hide thumbs

Table of Contents

When you first remove the speakers from the box they will have protective paint covers attached. Please attach

the grilles to the speakers.

Note

These speakers are paintable. If you wish to paint the speakers, please do so before attaching the speaker

grilles. Refer to "PAINTING THE SPEAKER CASING AND GRILLE" on page 8 for more information on painting

the speakers.

Attaching the grilles

Remove the protective paint cover from the speaker cabinet.

Align the grille with the grooves on the cabinet, then carefully push the grille edges onto the speaker cabinet.

Note

We recommend you use the supplied glue to guarantee that the grille is attached firmly. Apply the glue to the

areas depicted in the diagram below at right.

CAUTION

The aluminum grilles are easy to bend out of shape. Please be careful when replacing the grille on the speaker,

using only the minimum amount of force necessary.

The speakers can be placed on a bookshelf or wall/ceiling mounted with optional speaker brackets using 1/4 x

20 screws to fasten the optional bracket into the threaded inserts located on the back of the speakers. To wall /

ceiling mount the speakers, use the supplied mounting bracket. (see below)

*Secure to wall or ceiling

Included mounting

bracket

Large bracket screws

1. Use the bracket as a template mark the locations of the key hole slots on the mounting area.

2. Next, using appropriate hardware (not included) securely fasten the bracket to the wall/ceiling.

3. Position the speaker in the bracket and secure the speaker by using the two large bracket screws included.

(see above)