Qilive Q.6828 User Manual page 14

EN
4. Dismantle the door and right bottom hinge assembly (hinge shaft & adjustable foot
& hinge), and disassemble the right bottom hinge assembly.
The screw on the right bottom hinge shall be removed and installed onto the
opposite of the hinge.
5. Assemble the hinge shaft and adjustable foot on the other side of hinge, then
assemble the whole hinge assembly on the other side of refrigerator.
6. Remove the door upper cover, install the upper hinge sleeve, door signal line to
the other side and install the door upper cover.
Dismantle the door stopper and sleeve pipe from the right bottom of the door, then
insert the sleeve pipe into hinge hole in left bottom of the door.
7. Take out the left top hinge and left top hinge cover from accessory bag; place the
door on bottom hinge, and mount left top hinge.
Hole cover
Sleeve pipe
Stopper
Stopper screw
Hole cover
Hole cover
Hole cover
Door signal line
Door upper cover
Sleeve pipe
14