Qilive Q.6828 User Manual page 12

the performance and life of the product are reduced. And the manufacturer does
EN
not provide basic product warranty.
• The space on top of the refrigerator shall be greater than 10cm, and the
refrigerator should be placed against a wall with a distance of more than 10cm to
facilitate heat dissipation.
• Spare enough space for convenient opening of the doors and drawers.
Precautions before installation:
– Before installation or adjustment of accessories, ensure that the refrigerator is
disconnected from power.
– Precautions shall be taken to prevent fall of the handle from causing any personal
injury.
4.2. LEVELLING FEET
Schematic diagram of the levelling feet:
Note: The picture above is for reference only. The actual configuration will depend on
the physical product or statement by the distributor.
Adjustment procedures:
1. Turn the feet clockwise to raise the refrigerator;
2. Turn the feet counter-clockwise to lower the refrigerator;
3. Adjust the right and left feet based on the above procedures to a horizontal level.
4.3. INSTALL THE DOOR HANDLE
Tools required:
Note: The above tools are not supplied.
1. Power off this appliance before conducting this operation. Remove all food from
door shelves. Use thin-blade screwdriver to remove the screw hole caps
the door, and use a cross-head screwdriver to fix screws
tightly.
2. Assemble the screw hole cap
The reverse operation is for disassembly.
Lower
Higher
Cross-head
screwdriver
on the screw hole of handle.
12
Thin-blade screwdriver
from
into the screw hole