Dispensing A Coffee Drink With Milk - Siemens EQ900plus TQ903 Z Series Instructions For Use Manual

en operation
To ensure that only pleasant-tasting
and easily digestible aromatic sub-
stances are released, coffee beans
are freshly ground and brewed again
by the appliance.
The longer coffee brews, the more
bitter substances and undesirable
aromas are released. These bitter
substances and undesirable aromas
affect the taste and digestibility of
coffee.
Note: The functions "doubleShot" and
"tripleShot" depend on the beverage,
the beverage strength and the bever-
age size selected.
7.4 Dispensing a coffee drink
with milk
An example explains how to make a
latte macchiato.
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The appliance is switched on and
¡
the water tank and bean container
have been filled.
The milk container or milk adapter
¡
is connected.
The milk container is filled with
¡
milk or the milk adapter hose is
immersed in milk.
Place a glass underneath the
1.
beverage outlet.
Press and select
2.
"baristaMode".
Press "Classic".
3.
1
Depending on the appliance specifications
54
Select the beverage symbol for
4.
latte macchiato.
Press the beverage symbol and
5.
set the beverage parameters.
To set the strength , press the
‒
segments.
To set the per-cup quantity ,
‒
press the segments.
To set the milk ratio , press the
‒
segments.
To set the grinding level
‒
press the segments.
→ "Using electronic grinding
level adjustment eGrinder",
Page 55
To set the contact time
‒
the segments.
To set the brewing temperature
‒
, press the segments.
To change the bean container
‒
press ⁠ .
Press "Start" and wait until the pro-
6.
cess is complete.
To completely stop dispensing
‒
the beverage, press "Stop".
To only stop the current dis-
‒
pensing step, press "Skip".
Notes
If you do not change any settings
¡
for approx. 30 seconds, the appli-
ance will exit settings mode.
The appliance saves the settings
¡
automatically.
To reset all beverage parameters,
¡
press "Reset".
Tips
You can also pre-heat cups before
¡
dispensing using hot water or the
1
cup heater .
,
, press
1
,