Panasonic Omnivision PV-C1322 Operating Instructions Manual page 9

Manual Clock Set Reset all unit Memory Functions
If AUTO CLOCK SET was incomplete, manually When moving unit to a new location, or ifa
set the clock as follows. mistake was made in the Initial Setup section.
¢ Make sure a tape is not inserted in the unit.
Press ACTION on the Remote to
display SET CLOCK Menu screen.
\tz__ SET CLOCK
=I
=
=
"
©
--
c
G
—eseol-l-yivooNT
mms = °
Press A ¥ to select the month 7 Turn the unit
and press P to set. In the same Power on.
manner, select and set the date,
year, time, and DST. (Daylight 2 Press and hold both PLAY and
Saving Time) FF on the unit for more than 5
seconds.
SET CLOCK ¢ The power will shut off.
¢ Please ignore "NO CASSETTE' warning.
3 Do "Initial Setup" on page 8.
SET :<>
START 7 ACTION
Press ACTION twice to start
CLOCK and exit.
"wee
aun Note to CABLE System Installer
Vv 'CH DOWN This reminder is provided to call the
ACTION > -VOL UP CABLE (Cable TV) System Installers
4:VOL DOWN attention to Article 820-40 of the NEC
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be
connected to the grounding system of
the building, as close to the point of
cable entry as practical.