Panasonic Omnivision PV-C1322 Operating Instructions Manual page 25

TAPE
POSITION
NUMBER
Keys
SEARCH
SELECT/SET
A (CHUP
vy :CH DOWN
» :-VOL UP
4:VOL DOWN
FF
REW
PANU Com@yer-y¢-hi(olam al ities ice) ars
@ Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF), blank
tape is Played for 5 minutes
=> Power turns off
* This feature is canceled if any button is
pressed during above mode.
@ Auto Playback
Insert a tape in Power off mode
=> Power turns on
* Playback begins if tape has no record tab.
@ Auto Rewind
Tape reaches its end
=> Rewind => Stop
@ Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
Rewind => Stop => Eject
Tape Position Display
To find out present tape position and amount of tape
remaining.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
Press TAPE POSITION to detect
current tape position.
) © "DETECTING TAPE POSITION"
Leases TAPE_POSITION | is displayed only when a
cassette is first inserted and it
vy takes several seconds for
correct tape position to appear.
* The present tape position
indication and amount of tape
"| remaining (according to tape
rizown] speed) is displayed.
8 mes Tape remaining time display may
peal Eo not be precise.
>
.
<
st)
3
qQ
cs]
Qa
2)
x=
om
=
oO
=
o
=)
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
a>
¢ This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
25