Special Tools; Figure 6 Main Holding Tool (Horseshoe): Code No.: Sj 151-9000-1; Figure 7 Fork. For Use When Fitting Omp Cardan Shaft Code No.: Sj 151-9000-3; Figure 8 Figure 3: Sj 151-9000-12 - White OMP 7 Series Repair Instructions

17

Special tools

Figure 7 Fork. For use when fitting OMP cardan shaft
Figure 6 Main holding tool (horseshoe):
Code No.: SJ 151-9000-3.
Code No.: SJ 151-9000-1.
Figure 9 Mandrel

Figure 8 Figure 3: SJ 151-9000-12.

Code No.: SJ 151-0414
Mandrel:
Code No.: SJ 151-9000-7 or SJ 151F9000-7
Figure 10 Holding tool for OMPW N
Code No.: SJ 151–9000-14
Holding tool for motor with square mounting flange:
Code No.: SJ 151-9000-12.
Holding tool for OMPW N.
Code No.: SJ 151-9000-14.
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
All rights reserved.