Rinnai CX199i Installation And Operation Manual page 22

You Will Need:
•
Rinnai Tankless Water Heater
•
Wall Mounting Bracket
Supplied by Installer:
•
Level
•
Minimum of 6 screws (more screws may
be needed depending on wall type)
Use appropriate screws for type of wall
constructions.
Instructions:
1. Hold the wall mounting bracket up against
the wall and use a level to make sure the
bracket is even. Proper operation requires
the water heater to be level.
Figure 8: Level the bracket
2. Use four screws to secure the wall mounting
bracket to the wall (two screws on the far left
side and two screws on the far right side).
Use the appropriate screws for the wall
construction to secure the mounting bracket
to the wall between two studs.
Figure 9: Secure the bracket
22
3. Insert the top bracket into the wall
mounting bracket. Make sure the wall
mounting bracket is attached to the wall
and can hold the weight of the water
heater before you fully let go.
Figure 10: Mount the top bracket
Rinnai Tankless Water Heater Installation and Operation Manual